 |
Automatically
Sequences Lights ON and OFF |
|
Automatically
Sheds Loads to Prevent Electrical Overload |
|
Eliminates
Power Surges in Electrical System |
|
Contains
8 Load Relays, 30 Amp Load per Relay |
|
Remote
Manual Override |
|
Load
Shed Priority Programmable |
|
Easy
Installation |
| |
|
| The
"LOAD MANAGER MARK II" is a precision solid-state controller,
which sequentially switches 8 self-contained relays at 1/2 second
intervals. Individual switches, which the user may install, can select
the combination of outputs. These switches may be used to turn the
outputs "ON" or "OFF" at any time. The "Master
Control" switch starts the sequential switching when it is turned
"ON". Likewise turning the "Master Control" switch
"OFF" sequentially de-energizes the loads at 1/2 second
intervals.
|
| In
addition the "LOAD MANAGER MARK II" monitors the vehicle's
battery voltage. When electrical loads exceed the alternator output,
the voltage drops. This is sensed by the "LOAD MANAGER MARK II"
and the outputs are individually de-energized. Up to 5 outputs are
controlled. Only as many are shut down as are required to maintain
the system voltage. The shut down sequence may be altered by programming
switches internal to the "LOAD MANAGER MARK II" and accessible
through a removable cap. |
| An
indicator is included to signal when the "LOAD MANAGER MARK II"
is active and when it is in the "LOAD REDUCE" mode. |
| The
output relays which are part of the "LOAD MANAGER MARK II"
have both normally open and normally closed contacts. This provides
a variety of options for the installer. |
| |
| Outline
Drawing |
| Instruction
Manual (.pdf file, 488Kb) |
