 |
 Low Voltage Alarm / 1901 |
| Model # 091-85-XX | |
| Detects when the battery voltage drops below a threshold and remains low for 120 seconds. At that time a relay is operated which may be connected to the low voltage indicator and alarm. | |
 |
Load Manager 1H |
| Model # 091-96-12 | |
| This Load Manager monitors D.C. voltage and operates a relay when the voltage drops below its set point. Special high Hysteresis feature maintains the relay in the energized condition. | |
 |
Load Manager P |
| Model # 091-141 | |
| The Load Manager P is low voltage disconnect with a timer to shut down a vehicle's radio or computer to prevent complete discharge of the battery. | |
 |
 Load Manager 2 |
| Model # 091-79 | |
| This Load Manager controls 2 loads. With 30 ampere relays built in, upon system overload one relay sheds loads before the other relay. | |
 |
 Load Manager |
| Model # 091-32 | |
| This Load Manager sequences 7 loads and sheds up to 5 of them. Requires external relays. | |
|
Load Manager -R |
| Model # 091-32R-12 | |
| This Load Manager sequences 7 loads and sheds up to 5 of them. A seperate input is provided to reverse the sequence of load shedding while in transit and at the scene. Requires external relays. | |
|
|
| Model # 091-32-S | |
| This Load Manager sequences 7 loads and sheds up to 5 of them. Requires external relays that are energized by supplying +12 volts to them. | |
 |
Soft Start |
| Model # 091-27 | |
| This Lamp Sequencer sequentially switches ON 7 self loads at 1/2 second intervals. | |
 |
 Load Manager Mark II |
| Model # 091-60 | |
| This Load Manager sequentially switches 8 self contained relays at 1/2 second intervals. | |
 |
Load Manager 1901 |
| Model # 091-86-1901 | |
| This Load Manager sequences 8 loads and sheds up to 8 of them. Requires external relays. | |
 |
 Load Manager Mark IV-AT |
| Model # 091-75-AT | |
| This Load Manager sequences 9 loads and sheds up to 9 of them. High Idle control speeds up the engine to increase alternator output prior to shedding loads. Requires external relays. Completely independent sequencing and shedding programming through internal DIP switched provided. | |
 |
 Load Manager Mark IV |
| Model # 091-75 | |
| This Load Manager sequences 10 loads and sheds up to 10 of them. Requires external relays. Completely independent sequencing and shedding programming. Also available with high idle option. | |
